Bin Peng¹, Baisheng Nie This email address is being protected from spambots. You need JavaScript enabled to view it.^2,3,4, Jinxin Huang⁵, Jiesheng Shen^2,3 and Jun Zhang^2,3

¹Hunan Institute of Technology, School of Safety and Environment Engineering, Hengyang 421002, P.R. China
²China University of Mining & Technology (Beijing), State Key Laboratory of Coal Resources and Safe Mining, Beijing 100083, P.R. China
³China University of Mining and Technology (Beijing), Beijing Key Laboratory for Precise Mining of Intergrown Energy and Resources, Beijing 100083, P.R. China
⁴Xinjiang Institute of Engineering, Urumqi 830023, P.R. China
⁵Curtin University, Western Australian School of Mines, Department of Mining Engineering and Metallurgical Engineering, Kalgoorlie, 6430 Australia

REFERENCES

1. [1] Chen, K., D. Zhang, and Y. S. Zhang (2013) Development of a 3D laser scanning system for the cavity, Proc. of International Conference on Optics in Precision Engineering and Nanotechnology, Singapore, 87691F.
2. [2] Fekete, S., M. Diederichs, and M. Lato (2010) Geotechnical and operational applications for 3-dimensional laser scanning in drill and blast tunnels, Tunnelling and Underground Space Technology 25(5), 614 628. doi: 10.1016/j.tust.2010.04.008
3. [3] Jeffery, A. J., S. Durucan, and J. Dennis (1994) An automated laser scanning system for mine tunnel surface characterisation, Proc. of the 12th Triennial World Congress of International Federation of Automatic Control, Sydney, Australia, 531–534.
4. [4] Huber, D. F., and N. Vandapel (2006) Automatic threedimensional underground mine mapping, International Journal of Robotics Research 25(1), 717. doi: 10.1177/0278364906061157
5. [5] Zlot, R., and M. Bosse (2014) Efficient large-scale three-dimensional mobile mapping for underground mines, Journal of Field Robotics 31(5), 731752. doi:10.1002/rob.21504
6. [6] Stuttle, M. C. (1999) Laser scanning aids underground mine mapping, Mining Engineering 51(3), 4546.
7. [7] Ahamad, N., and S. K. Ojha (2015) The practical application of laser scanning in a mining environment, Proc. of the 2nd National Conference on Mining Equipment: New Technologies, Challenges and Applications, Dhanbad, India, 136142.
8. [8] Gu, F. Y., and H. Q. Xie (2013) Status and development trend of 3D laser scanning technology in the mining field, Proc. of the International Conference on Remote Sensing, Environment and Transportation Engineering, Nanjing, China, 407410.
9. [9] Zhou, Y., L. Yang, and Y. B. Leng (2010) Development of Terrain deformation monitor system based on 3-D laser scanning technology, Applied Mechanics and Materials 36(12), 192198. doi: 10.4028/www.scientific.net/AMM.36.192
10. [10] Salagean, T., T. Rusu, D. Onose, et al. (2016) The use of laser scanning technology in land monitoring of mining areas, Carpathian Journal of Earth and Environmental Sciences 11(2), 565573.
11. [11] Hu, H., T. M. Fernandez-Steeger, M. Dong, et al. (2015) Deformation monitoring and recognition of surface mine slope using LiDAR, Proc. of 12th International IAEG Congress, Torino, Italy, 451454.
12. [12] Yue, D. P., J. P. Wang, J. X. Zhou, et al. (2010) Monitoring slope deformation using a 3D laser image scanning system: a case study, Mining Science and Technology 20(6), 898903. doi: 10.1016/S1674-5264(09)60303-3
13. [13] Osasan, K. S., and T. B. Afeni (2010) Review of surface mine slope monitoring techniques, Journal of Mining Science 46(2), 177186. doi: 10.1007/s10913-010-0023-8
14. [14] Lian, X. G., and H. F. Hu (2017) Terrestrial laser scanning monitoring and spatial analysis of ground disaster in Gaoyang coal mine in Shanxi, China: a technical note, Environmental Earth Sciences 76(7), 287. doi:10.1007/s12665-017-6609-6
15. [15] Kapica, R., D. Vrublova, and M. Michalusova (2014) 3D laser scanning of mining machines at nastup tusimice mine in the Czech Republic, International Journal of Mining, Reclamation and Environment 28(1), 6675. doi: 10.1080/17480930.2013.866790
16. [16] Muzik, J., T. Vondráková, D. Sitányiová, et al. (2015) Limestone quarry reserve estimation by laser scanning and GIS tools, Procedia Earth and Planetary Science 15, 382388. doi: 10.1016/j.proeps.2015.08.008
17. [17] Liu, X. L., X. B. Li, F. B. Li, et al. (2008) 3D cavity detection technique and its application based on cavity auto scanning laser system, Journal of Central South University of Technology 15(2), 285288. doi: 10.1007/s11771-008-0053-4
18. [18] Yu, L. W., K. Zhan, and D. Zhang (2016) Design of a fast 3D laser scanner for mining, Electronic Journal of Geotechnical Engineering 21(26), 1033710347.
19. [19] Fiorani, L., M. Bortone, S. Mattei, et al. (2000) Miniaturized laser range finder for the volumetric characterization of underground cavities, Proc. of Proceedings of the Conference on Subsurface Sensing Technologies and Applications II, San Diego, U.S., 457463.
20. [20] Cui, H., Q. W. Hu, Q. Z. Mao, et al. (2017) Spiral trajectory planning approach for underground cavity measurements based on laser scanning, Measurement 110(3), 166175. doi: 10.1016/j.measurement.2017.05.061
21. [21] Campbell, A. D., and M. J. Thurley (2017) Application of laser scanning to measure fragmentation in underground mines, Mining Technology 126(1), 18. doi:10.1080/14749009.2017.1296668
22. [22] Eyre, M., A. Wetherelt, and J. Coggan (2016) Evaluation of automated underground mapping solutions for mining and civil engineering applications, Journal of Applied Remote Sensing 10(4), 046011. doi: 10.1117/1.jrs.10.046011
23. [23] Guo, J. T., J. Z. Jiang, L. X.Wu, et al. (2016) 3D modeling for mine roadway from laser scanning point cloud, Proc. of International Geoscience and Remote Sensing Symposium, Beijing, China, 44524455.
24. [24] Slaker, B. A., M. M. Murphy, and T. Miller (2018) Analysis of extensometer, photogrammetry and laser scanning monitoring techniques for measuring floor heave in a underground limestone mine, Transactions of the Society for Mining, Metallurgy, and Exploration 34(1), 3137. doi: 10.19150/trans.8746
25. [25] Yang, Q. L., Z. Y. Zhang, X. Q. Liu, et al. (2017) Development of laser scanner for full cross-sectional deformation monitoring of underground gateroads, Sensors 17(6), 1311. doi: 10.3390/s17061311
26. [26] Ma, C. D.,W. Fu, S. X. Hu, et al. (2016) Research and application of in-situ measure device on high-efficiency convergence deformation for the large cross section roadway, Proc. of Proceedings of the 2016 International Conference on Advanced Materials Science and Environmental Engineering, Chiang Mai, Thailand, 196200.
27. [27] Li, Y. L. (1991) Analysis of measure method for roadway section, Nonferrous Metals (Mining Section) 43(2), 3540. (In Chinese)
28. [28] Tang, C. H. (1987) Simple method for measuring tunnel section and perimeter, Industrial Safety and Dust Control 3(1), 2829. (In Chinese)
29. [29] Li, L., J.Wang, T. T.Wang, et al. (2011) Application of 3D laser scanning technology to a goldmine underground survey, Proc. of International Symposium on Lidar and Radar Mapping, Nanjing, China, 393403.
30. [30] Argüelles-Fraga, R., C. Ordóñez, S. García-Cortés, et al. (2013) Measurement planning for circular crosssection tunnels using terrestrial laser scanning, Automation in Construction 31(6), 19. doi: 10.1016/j.autcon.2012.11.023
31. [31] Watson, C., and J. Marshall (2015) Towards extracting absolute roughness from underground mine drift profile data, Proc. of 37th International Symposium on Application of Computers and Operations Research in the Mineral Industry, Fairbanks, U.S., 10881097.
32. [32] Kajzar, V., R. Kukutsch, P.Waclawik, et al. (2017) Innovative approach to monitoring coal pillar deformation and roof movement using 3D laser technology, Procedia Engineering 191, 873879. doi: 10.1016/j.ijrmms.2015.06.014
33. [33] Kukutsch, R., V. Kajzar, P. Konicek, et al. (2015) Possibility of convergence measurement of gates in coal mining using terrestrial 3D laser scanner, Journal of Sustainable Mining 14(1), 3037. doi: 10.1016/j.jsm.2015.08.005
34. [34] Groccia, C., M. Cai, and A. Punkkinen (2016) Quantifying rock mass bulking at a deep underground nickel mine, International Journal of Rock Mechanics and Mining Sciences 81(3), 111. doi: 10.1016/j.ijrmms.2015.06.014
35. [35] Wang, X., X. F. Huang, F. L. Bian, et al. (2007) 3D triangulation of terrestrial laser scanning data based on spherical projection, Proc. of Geoinformatics 2007: Cartographic Theory and Models, Nanjing, China, 675107.
36. [36] Mokhtarian, F., and A. K. Mackworth (1992) Atheory of multiscale, curvature-based shape representation for planar curves, IEEE Transactions on Pattern Analysis and Machine Intelligence 14(8), 789805. doi:10.1109/34.149591
37. [37] Cai, P. (1985) Measurement of cross section of underground cavern by laser theodolite, Geotechnical Investigation & Surveying 13(4), 22. (In Chinese)
38. [38] Jin, B. B. (1990) The application of laser rendezvous method in cross section measurement and completion measurement, Geotechnical Investigation & Surveying 18(3), 7072. (In Chinese)
39. [39] Ding, C. (2013) Experimental and Numerical Study of “Key Ring’’ of Airflow Status in the Mine Tunnel , Ph.D. Desertation, China University of Mining & Technology (Beijing), Beijing, China. (In Chinese)
40. [40] Ding, C., X. Q. He, and B. S. Nie (2015) Numerical and experimental research on “key ring” distribution of ventilation in mine tunnels, Journal of Liaoning Technical University: Natural Science 34(10), 1131 1136. doi: 10.11956/j.issn.1008-0562.2015.10.006 (In Chinese)