Jianzhou Jiang This email address is being protected from spambots. You need JavaScript enabled to view it.1
1Jiangxi Technical College of Manufacturing, Nanchang, Jiangxi330095 China
Received: March 18, 2022 Accepted: June 23, 2022 Publication Date: August 12, 2022
Copyright The Author(s). This is an open access article distributed under the terms of the Creative Commons Attribution License (CC BY 4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are cited.
Nowadays, the development of social science and technology is very fast, and all kinds of new digital products emerge as the times require. In terms of various research directions, in this paper, research on the modeling and manufacturing of freeform curved surface based on five-coordinate numerical control was proposed. This is also an important research direction of CAD/CAM technology. The research method was mainly based on the five-coordinate numerical control method, and this technology was used to enhance the quality of each process in the process of freeform curved surface modeling and manufacturing. By analyzing the relationship between the tool contacts and the tool position points on two adjacent tool paths, error compensation is introduced to improve the calculation accuracy of the corresponding tool position points and the error value expression is obtained. During the verification of the algorithm, the arrangement factors of the sequence and the surface modeling were verified. It is concluded that our research is feasible.
[1] K. Zhang and K. Tang, (2016) “Optimal five-axis tool path generation algorithm based on double scalar fields for freeform surfaces" International Journal of Advanced Manufacturing Technology 83(9-12): 1503–1514. DOI: 10.1007/s00170-015-7646-5.
[2] Y. He, Z. Chen, R. Xu, and X. Wu, (2015) “Reducing fluctuation of machining strip width by tool position modification for five-axis NC machining of sculptured surfaces" International Journal of Advanced Manufacturing Technology 78(1-4): 249–257. DOI: 10.1007/s00170-014-6659-9.
[3] K. Xu and K. Tang, (2017) “Optimal Workpiece Setup for Time-Efficient and Energy- Saving Five-Axis Machining of Freeform Surfaces" Journal of Manufacturing Science and Engineering, Transactions of the ASME 139(5): DOI: 10.1115/1.4034846.
[4] Z. Zhou, Y. Zhang, and K. Tang, (2016) “Sweep scan path planning for efficient freeform surface inspection on five-axis CMM" CAD Computer Aided Design 77: 1–17. DOI: 10.1016/j.cad.2016.03.003.
[5] Y. Sun, H. Shen, and J. Fu, (2015) “Research on inverse evaluation mechanism in toolpath generation based on global interpolation simulation" International Journal of Advanced Manufacturing Technology 79(5-8): 1265–1283. DOI: 10.1007/s00170-015-6896-6.
[6] X. Liu, X. Zhang, H. Xu, and Z. Zeng, (2017) “Machining Error Analysis of Freeform Surface Off-Axis Three-Mirror System Based on Optical Performance Evaluation" Guangxue Xuebao/Acta Optica Sinica 37(8): DOI: 10.3788/AOS201737.0812005.
[7] S. Moodleah and S. Makhanov, (2015) “5-axis machining using a curvilinear tool path aligned with the direction of the maximum removal rate" International Journal of Advanced Manufacturing Technology 80(1-4): 65–90. DOI: 10.1007/s00170-015-6958-9.
[8] J. Zhang, L. Zhang, K. Zhang, and J. Mao, (2016) “Double NURBS trajectory generation and synchronous interpolation for five-axis machining based on dual quaternion algorithm" International Journal of Advanced Manufacturing Technology 83(9-12): 2015–2025. DOI: 10.1007/s00170-015-7723-9.
We use cookies on this website to personalize content to improve your user experience and analyze our traffic. By using this site you agree to its use of cookies.
