Wen Wang1 , Yan-Mei Yin1 , Shang-Hong He This email address is being protected from spambots. You need JavaScript enabled to view it.1 and Guang-Ming Liu2 1Hunan Province Key Laboratory of Safety Design and Reliability Technology for Engineering Vehicle, Changsha University of Science and Technology, Changsha 410114, P.R. China
2Hunan Oil Pump Co., LTD, Hengyang 421400, P.R. China
Received:
February 9, 2017
Accepted:
June 5, 2017
Publication Date:
September 1, 2017
Download Citation:
||https://doi.org/10.6180/jase.2017.20.3.11
Oil pump models with different gear tooth shapes were established and the internal flow field simulation were conducted by utilizing Pumplinx. Then the characteristics of steady state flux and flow pulsation were analyzed. The research shows that: compared with straight gear pumps, the flow pulsation of other toothed gear pumps is much lower, although they have lower flow at low and medium speed. Especially the flow pulsation of dislocation gear pumps is much lower than straight gear pumps. It decreased by 27% at 1100 rpm and 35% at 2700 rpm, compared with straight gear pumps. Finally the straight gear pump flow is tested experimentally, and the experimental results match the simulation very well. This proves that the internal flow field models are correct and useful in technically supporting the oil pump development.ABSTRACT
Keywords:
Gear Pump, Gear Tooth Shape, Simulation Analysis, Flow, Flow Pulsation
[1] Xiong, X. Y., “Optimal Design and Basic Theory of the Synchronization Gear Pump,” An Hui University of Science and Technology (2009). [2] Liu, Q., “Study on Instantaneous Flow and Pulsation Characteristic of the External Gear Pump,” Journal of Mechanical Transmission, Vol. 37, No. 6, pp. 1721 (2013). (Chinese) [3] Luan, Z. H., “Research on Synchronous Gear Pump,” Journal of Coal Science & Engineering (China), Vol. 16, No. 4, pp. 429433 (2010). (Chinese) doi: 10. 1007/s12404-010-0418-7 [4] Wu, B. H., Zhang, Y. W. and Yu, X. M., “Discussion on Theory and Structure for Low Pulsation Gear Pump,” Machine Tool & Hydraulics, Vol. 16, No. 6, pp. 1420 (1988). (Chinese) [5] Zhou, J. P., Jiang, M., Li, Y. M., Yin, J. X. and Yao, R. Y., “Low Flow Pulse Property of Helical Gear Pump,” Chinese Journal of Mechanical Engineering, No. 12, pp. 1820 (2000). (Chinese) doi: 10.3901/JME.2000. 12.018 [6] Zhao, L., Wang, D. P. and Ren, X. Y., “The Flow Pulse Property of Helical Gear Pump,” Journal of Dalian Railway Institute, Vol. 22, No. 4, pp. 2528 (2001). (Chinese) [7] Zhang, H. X., “Analysis on Flow Pulse and Property of Double Helical Gear Pump,” Machine Tool & Hydraulics, Vol. 39, No.10, pp. 8081+84 (2011). (Chinese) [8] Shang, C. M., Fan, J. F. and Zhang, X. M., “Analysis Comparatively of Pulse Characteristic to Two Kind of Gear Pump,” Journal of Changchun University Science and Technology, Vol. 27, No. 3, pp. 4143 (2004). (Chinese) [9] Huang, Y. P., Li, X. H. and Zhang, J., “The Flow Characteristic Simulation of the Multi-gear Pump,” Coal Mine Machinery, No. 10, pp. 3031 (2004). (Chinese) [10] Liu, Y. L. and Liu, Z. C., “Research on Low Pulsation and Low Noise of Gear Pump,” Journal of Xi’an University of Science & Technology, Vol. 10, No. 2, pp. 8592+74 (1990). (Chinese) [11] Zhang, Y. X. and Jin, J., “Analysis of Instantaneous Flow and Restraint of Pulsation for External Gear Pump,” Chinese Hydraulics & Pneumatics, No. 3, pp. 4649+31 (2015). [12] Hassan, A. B., “Study and Measures of Reduction in External Gear Pump Flow Pulsation,” Jilin University (2013). [13] Zou, H. F. and Jia, Z., “Flow Pulsation Mechanism Analysis and Design of Gear Pump,” Mechanacal Engineer, No. 3, pp. 4748 (2010). [14] Ma, F. Y., Huang, X. L., Wu, W. W., et al., “Design of Testing Method for Performance Measurement of Gear Oil Pump,” Noise and Vibration Control, No. 3, pp. 212216 (2012). (Chinese)REFERENCES
